ArcGIS Data Store se registra en un sitio de GIS Server que usted haya establecido como el servidor de alojamiento de una implementación de ArcGIS Enterprise. Debe actualizar todos los componentes de este sistema a la misma versión.
Prepararse para actualizar ArcGIS Data Store
Repase con detenimiento la siguiente información y complete las acciones requeridas antes de actualizar ArcGIS Data Store:
- Obtenga archivos de autorización nuevos de My Esri antes de actualizar. Si va a actualizar desde 10.3.x-10.8.1 a 10.7.x, necesita archivos de licencia nuevos de Portal for ArcGIS y ArcGIS Server. Si va a actualizar desde 10.8, no necesita archivos de licencia nuevos, a menos que desee cambiar las aplicaciones que licencie a través del portal o de roles de ArcGIS Server.
- Cree una copia de seguridad de su data store y guarde los archivos de copia de seguridad en una ubicación segura y remota. La forma de crear una copia de seguridad depende de la versión de ArcGIS Data Store a partir de la cual vaya a actualizar y del tipo de data store que vaya a actualizar.
- Si va a actualizar desde la versión 10.5.1 o posterior, cree una copia de seguridad completa de cada data store utilizando la utilidad backupdatastore. Si hay algún problema con la actualización y necesita volver a su instalación anterior, puede reinstalar la versión anterior de software de ArcGIS Data Store y utilizar estos archivos de copia de seguridad y la utilidad restoredatastore para restaurar sus datos.
- Si va a actualizar desde un data store relacional o de caché de teselas con la versión 10.5 o anteriores, utilice la utilidad exportmanageddb para realizar copias de seguridad de dichos data stores. Si hay algún problema con la actualización y necesita volver a su instalación anterior, puede reinstalar la versión anterior de software de ArcGIS Data Store y usar la utilidad importmanagedb para importar el archivo de exportación.
- Si va a actualizar desde un big data store espaciotemporal 10.4 o 10.4.1, realice una copia de seguridad del directorio de contenido en cada equipo en el big data store espaciotemporal. Si hay algún problema con la actualización y necesita volver a su instalación anterior, puede reinstalar la versión anterior de software de ArcGIS Data Store y reemplazar el directorio de contenido de cada equipo por las copias de seguridad de los directorios.
- Antes de actualizar un data store relacional o data store de caché de teselas, compruebe el tamaño del directorio de ArcGIS Data Store en cada equipo. Asegúrese de que el equipo contenga suficiente espacio de disco libre para acomodar el doble de tamaño del directorio ArcGIS Data Store.
- Descargue los archivos de instalación de software de ArcGIS Data Store, Portal for ArcGIS, ArcGIS Server y ArcGIS Web Adaptor de My Esri.
- Al ejecutar el programa de instalación de 10.8.1, su ArcGIS Data Store se actualizará automáticamente a 10.8.1. No es necesario obtener e instalar en orden cada versión publicada previamente. No desinstale su versión anterior de ArcGIS Data Store.
- Para que su portal de ArcGIS Enterprise funcione, debe ser la misma versión que la de su servidor de alojamiento. También tendrá que reinstalar sus instancias de ArcGIS Web Adaptor en la misma versión que ArcGIS Server.
- Si está actualizándose desde 10.4 y está archivando datos de observación transmitidos desde un sitio federado de ArcGIS GeoEvent Server a su big data store espaciotemporal, debe aplicar el Parche 1 para ArcGIS 10.4 GeoEvent Extension a su 10.4 ArcGIS GeoEvent Server. Después de aplicar el parche, siga las instrucciones para reparar los datos antes de continuar con la actualización de los componentes de su implementación de ArcGIS Enterprise.
- Si está utilizando un sitio federado de ArcGIS GeoEvent Server, detenga el servicio de ArcGIS GeoEvent Server en todos los equipos antes de actualizar ArcGIS Server.
- Si actualiza desde 10.3 o 10.3.1, debe otorgar el control completo sobre su directorio de contenido de ArcGIS Data Store a la cuenta de ArcGIS Data Store. Si actualiza desde 10.4 o posterior, los privilegios ya estarán establecidos.
- Si tiene un data store de caché de teselas que se ejecuta en modo principal-de respaldo, asegúrese de que el equipo de respaldo tenga acceso a la ubicación de copia de seguridad predeterminada antes de actualizar. En caso contrario, no existirá ninguna ubicación de copia de seguridad predeterminada para su data store de caché de teselas después de actualizar y tendrá que configurar una.
- Si tiene un data store de caché de teselas que contiene más de un equipo, también debe abrir los puertos 29079–29090 y 4369 en el firewall.
- Lea la siguiente sección y actualice los componentes de ArcGIS Enterprise requeridos antes de actualizar ArcGIS Data Store.
Orden de actualización
Como ArcGIS Data Store siempre se utiliza como parte de una implementación de ArcGIS Enterprise, debe actualizar determinados componentes de la implementación antes de actualizar ArcGIS Data Store. Actualice los componentes en este orden:
- Actualizar Portal for ArcGIS.
- Actualizar ArcGIS Web Adaptor (para el portal).
- Actualizar el sitio de ArcGIS Server que actúa como servidor de alojamiento del portal. Debe actualizar el servidor de alojamiento antes de actualizar ArcGIS Data Store.
- Actualizar ArcGIS Web Adaptor (para ArcGIS Server).
- Actualizar ArcGIS Data Store.
- Si su implementación los incluye, actualice los sitios de ArcGIS Server adicionales. Se incluyen la actualización de sitios de ArcGIS GeoEvent Server, la actualización de sitios de ArcGIS GeoAnalytics Server, la actualización de sitios de ArcGIS Notebook Server y la actualización de sitios de ArcGIS Mission Server.
Data stores de alta disponibilidad
El orden de actualización de cada equipo en un data store de alta disponibilidad no importa si empieza con ArcGIS Data Store 10.7. Sin embargo, primero debe instalar el software en cada equipo y, después, actualizar desde cualquier equipo.
Cuando actualice un data store relacional o de caché de teselas (10.7.1 o anterior) de alta disponibilidad, instale la nueva versión de ArcGIS Data Store en los equipos principal y de respaldo. A continuación, puede configurar ambos equipos ejecutando el Asistente de configuración de data store o la utilidad configuredatastore desde el equipo principal o de respaldo. De esta manera se configuran ambos equipos.
Nota:
Si actualiza un data store de caché de teselas de alta disponibilidad a ArcGIS Data Store 10.8, el data store se convertirá en un data store de caché de teselas de clúster de dos equipos. Debe contar con un número impar de equipos en el data store de caché de teselas, por lo que tendrá que agregar al menos un equipo más de data store de caché de teselas y restaurar los datos para equilibrar las cachés de escenas. Si actualiza un data store de caché de teselas 10.8 a 10.8.1, permanecerá en el de clúster.
Si actualiza un data store de caché de teselas 10.7.1 o anterior de alta disponibilidad a ArcGIS Data Store 10.8.1, permanecerá en el modo principal-de respaldo.
Si su big data store espaciotemporal o de caché de teselas (clúster) contiene más de un equipo, instale una versión nueva de ArcGIS Data Store en todos los equipos. A continuación, inicie sesión en uno de los equipos con las credenciales de administrador y configure todos los equipos del big data store espaciotemporal ejecutando el Asistente de configuración de data store o la utilidad configuredatastore. De este modo, se configuran todos los equipos del big data store espaciotemporal o de caché de teselas.
Precaución:
Asegúrese de que nadie cree ninguna capa de entidades espaciotemporales alojada hasta que termine de actualizar todos los equipos en el big data store espaciotemporal. Desde ArcGIS Server Manager, puede detener el servicio del sistema GeoAnalyticsTools para garantizar que nadie ejecute GeoAnalytics Tools durante la actualización. Además, detenga los servicios de rastreo de ubicación que utiliza ArcGIS Tracker.
Steps to upgrade ArcGIS Data Store
Una vez tenga los archivos de instalación y los archivos de copia de seguridad y haya actualizado el servidor de alojamiento, complete los pasos de actualización para cada tipo de data store. Todos los data stores registrados en el mismo sitio de ArcGIS Server deben ejecutar la misma versión de ArcGIS Data Store. Tenga en cuenta lo siguiente al actualizar ArcGIS Data Store:
- Instale siempre ArcGIS Data Store en todos los equipos de un data store antes de reconfigurar el data store.
- No desinstale ArcGIS Data Store antes de instalar la nueva versión.
- Si tiene equipos principal y de respaldo en su data store relacional o de caché de teselas, instale la nueva versión de ArcGIS Data Store en los equipos principal y de respaldo. Después, reconfigure el data store de alguno de los equipos.
- Si tiene varios equipos de big data stores espaciotemporales o de caché de teselas configurados en su sitio de ArcGIS Server, instale la nueva versión de ArcGIS Data Store en todos los equipos de data stores.
- Si su licencia de ArcGIS Server tuviera una fecha de caducidad, actualice la licencia en el ArcGIS Data Store relacional después de mejorar y actualizar la licencia de ArcGIS Server y de actualizar el data store relacional.
You can upgrade using an interactive wizard-driven experience by launching the Setup.exe program, or run Setup.exe to install the software only and run the configuredatastore utility from a command prompt or script to silently upgrade ArcGIS Data Store. No matter which method you use, the Setup.exe installation file detects and updates the existing installation of ArcGIS Data Store.
Nota:
Upgrading ArcGIS Data Store restarts the ArcGIS Data Store service.
Upgrade using an interactive wizard-driven experience
After you complete the steps outlined in Prepare to upgrade ArcGIS Data Store and have upgraded the ArcGIS Enterprise components that must be upgraded before ArcGIS Data Store, follow these steps to upgrade your data stores using an interactive wizard. If you want to upgrade using commands instead, proceed to the next section.
- If you are using a spatiotemporal big data store with ArcGIS GeoEvent Server, sign in to ArcGIS GeoEvent Server Manager and stop the feature services used to archive data.
- Optionally, if you want to prevent users from editing hosted feature layers while you are upgrading, connect to the hosting server (GIS Server site) from ArcGIS Server Manager and stop all hosted feature services. Similarly, if you have a federated ArcGIS GeoAnalytics Server site, connect to it from ArcGIS Server Manager and stop all hosted feature services.
- Update the ArcGIS Data Store installation on every data store machine.
To update the installation, run the ArcGIS Data Store Setup.exe on every machine that participates in a data store that is configured with the same hosting server. Do not uninstall the existing ArcGIS Data Store installation.
- During the installation, read the license agreement and accept it, or exit if you do not agree with the terms.
If you accept the license agreement, the ArcGIS Data Store setup program displays the features that will be installed.
- The
account used by your existing installation is prepopulated in the
ArcGIS Data Store input box.
Provide the password for the account. Typically, this
is the password you defined when installing the software. If the
password has changed since you installed the software, you need to
provide the password you designated when modifying the account.
If the password
is not validated successfully, an error message is displayed
indicating the password is invalid. If you are unsure of the
password for the account, contact your system
administrator.
Nota:
Earlier versions of ArcGIS Data Store used the Local System account to create the ArcGIS Data Store service. At version 10.4 and later, you specify a local user or domain user account to start the ArcGIS Data Store service. If you are upgrading from ArcGIS Data Store 10.3 or 10.3.1, you must manually provide this account full control to your ArcGIS Data Store content directory (the default location is C:\arcgisdatastore).
- Once you have updated the ArcGIS Data Store installation on all data store machines, run the Data Store Configuration wizard to configure each type of data store to complete the upgrade.
How many times you run the Data Store Configuration wizard depends on your configuration.
- For relational and tile cache (primary-standby mode) data stores, connect to either the primary or standby machine from the Data Store Configuration wizard. Completing the steps in the wizard upgrades the data store on both machines.
- If your relational and tile cache data stores are on the same machine, you only have to run the Data Store Configuration wizard once to upgrade both data stores.
- For tile cache (cluster mode) and spatiotemporal big data stores, connect to any of the clustered tile cache or spatiotemporal big data store machines from the Data Store Configuration wizard. Complete the steps in the wizard to upgrade all machines in that data store.
- In the Data Store Configuration wizard, provide the URL for the hosting server and the user name and password of an ArcGIS Server administrator for the hosting server and click Next.
- All machines in the data stores associated with this hosting server have the same version of ArcGIS Data Store installed.
- All machines in the data stores associated with this hosting server are accessible.
- The hosting server is accessible.
- Once all prerequisites are met, the Prerequisite Check page shows each data store to be upgraded. Click Next to reconfigure these data stores with the hosting server and complete the upgrade.
- When configuration completes, the Upgrade Status page appears.
- For each data store that was upgraded successfully, success appears in Status field. For highly available relational or tile cache (primary-standby mode) data stores, a status appears for both machines. If all data store machines upgraded successfully, click Next to proceed to the Configuration Status page. You can close the Data Store Configuration wizard at this point.
- If any upgrades were not successful, that data store or machine shows a failed status, and messages are displayed to help you troubleshoot the problem. Correct the problems and run the Data Store Configuration wizard again to upgrade the machines that previously failed.
- If you have a spatiotemporal big data store, confirm the spatiotemporal big data store shows a status of healthy.
To determine a data store's status, log in to the ArcGIS Server Administrator Directory for the hosting server and run the validate REST command.
- If your portal has federated ArcGIS GeoEvent Server or ArcGIS GeoAnalytics Server sites, upgrade these sites. Once you upgrade successfully, make sure the feature services are running and functional.
Precaución:
When the installation program completes, it automatically opens the Data Store Configuration wizard in your default browser. Do no proceed with configuration until you have installed the same version of ArcGIS Data Store on every data store machine.
If any prerequisites are not met, they appear on the Prerequisite Check page in the status for each data store type. You must correct any problems before you can proceed with upgrading.
Silently upgrade using commands
Rather than run the setup program, you can run the Setup.exe file at a command prompt or in a batch script to update the ArcGIS Data Store. After you complete the steps outlined in Prepare to upgrade ArcGIS Data Store and have upgraded the ArcGIS Enterprise components that must be upgraded before ArcGIS Data Store, run the setup file on every machine in the data store to upgrade.
- If you are using a spatiotemporal big data store with ArcGIS GeoEvent Server, sign in to ArcGIS GeoEvent Server Manager and stop the feature services used to archive data.
- Optionally, if you want to prevent users from editing hosted feature layers while you are upgrading, connect to the hosting server (GIS Server site) from ArcGIS Server Manager and stop all hosted feature services. Similarly, if you have a federated ArcGIS GeoAnalytics Server site, connect to it from ArcGIS Server Manager and stop all hosted feature services.
- Update the ArcGIS Data Store installation on every data store machine.
Run the Setup.exe file from a command prompt or in a script on every machine in your data store. For example, if you have a highly available relational data store (two machines) and a highly available spatiotemporal big data store that includes three machines, run the Setup.exe file on all five machines before you proceed with configuration.
Nota:
Do not uninstall the existing ArcGIS Data Store installation.
When silently upgrading using Setup.exe, you must specify the ArcGIS Data Store account. Typically, this is the account you defined when installing the software. If the account has changed since you installed, you need to provide the user name and password you designated when modifying the ArcGIS Data Storeaccount.
Earlier versions of ArcGIS Data Store used the Local System account to create the ArcGIS Data Store service. At version 10.4 and later, you specify a local user or domain user account to start the ArcGIS Data Store service. If you are upgrading from ArcGIS Data Store 10.3 or 10.3.1, you must manually provide this account full control to your ArcGIS Data Store content directory (the default location is C:\arcgisdatastore).
If you do not specify the ArcGIS Data Store account, or it does not match the account used by your current installation, the installation process displays a message indicating the credentials could not be validated. As a result, the installation will exit.
In the following example, the account used by the software is myaccount:
<path to ArcGIS Data Store setup download folder>\Setup.exe /qb USER_NAME=myaccount PASSWORD=mypassword
For example, to run the command with a domain account, such as mydomain\myaccount, with the password 4myI.s0nly, type the following:
\\machinename\mydownloadfolder\Setup.exe /qb USER_NAME=mydomain\myaccount PASSWORD=4myI.s0nly
Precaución:
Command line parameters are case sensitive. If you are having trouble upgrading, confirm the case matches the properties as shown in the examples.
- Use the configuredatastore command utility to reconfigure the data store with the same GIS Server site you were using before upgrading. You must run the command prompt as an administrator on the machine where ArcGIS Data Store is installed.
How many times you run the configuredatastore utility depends on your configuration.
- For relational and tile cache (primary-standby mode) data stores, log in to the primary or standby machine as a Windows administrator and run the configuredatastore utility. This upgrades the data store on both machines.
- If your relational and tile cache data stores are on the same machine, running the configuredatastore utility upgrades both.
- For tile cache (cluster mode) or spatiotemporal big data stores, log in to any of the clustered tile cache or spatiotemporal big data store machines as the user who installed ArcGIS Data Store and run the configuredatastore utility. This upgrades all machines in that data store.
In this example, the configuredatastore utility is run on a machine where both the relational and tile cache data stores are running. Both data stores are configured with the GIS Server site https://myserver.network.com:6443/arcgis:
configuredatastore https://myserver.network.com:6443/arcgis serveradmin MyAdminPassword C:\arcgisdatastore --stores relational,tilecache
In this example, the configuredatastore utility is run on one of the machines in a spatiotemporal big data store that is configured with the GIS Server site https://gisserver.mynetwork.com:6443/arcgis:
configuredatastore https://gisserver.mynetwork.com:6443/arcgis serveradmin MyAdminPassword C:\arcgisdatastore --stores spatiotemporal
Running the configuredatastore utility restarts ArcGIS Data Store on all machines in the data store.
Before upgrading, ArcGIS Data Store confirms that all machines in the data store have the same version of ArcGIS Data Store installed and all machines are accessible. If any machines are not updated or accessible, ArcGIS Data Store cannot proceed with the upgrade. Correct the installation or network problems and run the configuredatastore utility again.
- If you have a spatiotemporal big data store, confirm the spatiotemporal big data store shows a status of healthy.
To determine a data store's status, log in to the ArcGIS Server Administrator Directory for the hosting server and run the validate REST command.
- If your portal has federated ArcGIS GeoEvent Server or ArcGIS GeoAnalytics Server sites, upgrade these sites. Once you upgrade successfully, make sure the feature services are running and functional.
Consideraciones posteriores a la actualización de ArcGIS Data Store
El procedimiento de actualización mueve todos los archivos existentes de copia de seguridad del data store relacional 10.5 y anteriores y archivos de copia de seguridad del big data store espaciotemporal 10.5 a un nuevo subdirectorio en su ubicación de directorio de copia de seguridad. El nombre del directorio contiene el número completo de ArcGIS Data Store. ArcGIS Data Store mueve estos archivos de forma que usted no intente utilizarlos accidentalmente para restaurar su data store relacional actualizado, ya que no es compatible.
Por este motivo, debe crear copias de seguridad completas de sus big data stores espaciotemporales y relacionales después de que actualice ArcGIS Data Store. Por lo que pueda pasar, esto le ofrece una copia de seguridad completa aprovechable de su entidad alojada y datos de capa espaciotemporal antes de la próxima copia de seguridad programada.
Tras la actualización, confirme que los data stores estén accesibles. Puede hacerlo desde ArcGIS Server Manager o el Directorio del administrador de ArcGIS Server. Confirme también que sus capas de entidades y de escenas alojadas sigan funcionando.
Validar los data stores
Puede iniciar sesión en ArcGIS Server Manager para confirmar que su sitio de GIS Server todavía se puede comunicar con cada uno de sus data stores.
Siga estos pasos para validar un data store desde ArcGIS Server Manager:
- Inicie sesión en ArcGIS Server Manager.
- Vaya a Sitio > Data Stores.
- Active la casilla situada junto al data store que desee validar. (ArcGIS_Data_Store).
- Haga clic en Validar.
Si el data store se está ejecutando y el sitio de GIS Server puede comunicarse con él, aparecerá una marca de verificación verde en la columna Estado.
Confirmar que las capas funcionen
Asegúrese también de que los servicios sigan funcionando tras la actualización.
- Inicie sesión en ArcGIS Server Manager.
- Vaya a Servicios > Alojados.
- Compruebe que todos los servicios se estén ejecutando.